Micron 5400 PRO 960GB SATA 2.5" 7mm Non-SED Enterprise SSD

The Micron MTFDDAK960TGA-1BC1ZABYYR is a 960 GB enterprise solid-state drive from the 5400 PRO series that drops straight into any system with a standard 2.5-inch, 7 mm SATA bay. It gives IT teams a simple path to flash performance while keeping the familiar SATA 6 Gb/s infrastructure already installed in servers, storage arrays, and edge appliances.

With throughput that reaches up to 540 MB/s for sequential reads and 520 MB/s for sequential writes, the drive shortens application load times and speeds up large data transfers. It also sustains up to 95,000 random read IOPS and 33,000 random write IOPS, making it well suited for virtualization hosts, boot volumes in dense rack servers, and mixed-use workloads where low latency is critical.

Reliability is a core focus. The drive is rated for 1.5 drive writes per day and a total endurance of 2,628 TBW, all backed by a 3 million-hour mean time to failure. On-board power-loss protection preserves in-flight data during unexpected outages, data path protection guards against silent corruption, and adaptive thermal monitoring keeps performance consistent even in tightly packed racks.

Built with 176-layer 3D TLC NAND, the drive balances high performance with predictable wear characteristics. It operates within a 32 to 158 °F temperature range and draws only 3.9 W under load, helping administrators meet energy targets in power-constrained data centers and remote sites.

• 960 GB capacity in a 2.5-inch, 7 mm form factor
• SATA 6 Gb/s interface with up to 540 MB/s read and 520 MB/s write speeds
• Up to 95,000 random read IOPS and 33,000 random write IOPS
• Endurance rated at 1.5 DWPD and 2,628 TBW
• Power-loss protection, full data path protection, and adaptive thermal monitoring
• 3 million-hour mean time to failure
• Built on 176-layer 3D TLC NAND technology
• Typical active power draw of 3.9 W helps manage energy budgets