Eaton 3-Phase Metered Input Rack PDU G4, 120/208V, 42 Outlets, 24A, 8.6kW, L21-30 Input, 10 ft. Cord, 0U Vertical

The Eaton EVMI2130X is a rack power distribution unit that operates on 3 phase, 120 / 208 volt input and delivers up to 8.6 kilowatts to demanding IT loads. Built for dense server, storage, and network cabinets, it provides metered input data that helps administrators balance phases, avoid overloads, and plan capacity with confidence.

Forty-two outlets line the vertical housing. Twenty-four are C13 receptacles for everyday equipment, and eighteen are C39 combo outlets that accept either C14 or C20 plugs. The mix lets you energize both lower and higher draw devices without extra adapters, which is especially helpful in mixed environments such as converged infrastructure racks or colocation cages.

Installation is straightforward. A 10 foot cord with a NEMA L21-30P plug reaches your facility’s 30 amp, 3 phase source, and the 0U vertical chassis mounts tool-free to standard rack rails. Low-profile breakers sit close to the frame, so they clear sliding rails and cable managers.

Once online, you can read section-level voltage, current, and power on the integrated LCD, or pull the same data remotely through Ethernet, SNMP, or USB. Up to forty units can be daisy-chained, each with its own IP address, which simplifies network cabling in large rows. Optional temperature and humidity probes plug in to warn you about hot spots before they threaten uptime.

Security matters in modern data centers, and the fourth-generation Eaton firmware uses a chain-of-trust architecture with secure boot to block unauthorized code. That makes the EVMI2130X a natural fit for regulated industries, multitenant facilities, and any site that needs to lock down infrastructure without adding external gateways.

A housing made from aluminum keeps weight down while remaining strong, and a three-year limited warranty backs the build quality. For enterprise, colocation, or edge sites that need dependable 3 phase distribution with clear visibility and solid cybersecurity, the Eaton EVMI2130X covers the essentials without wasting a single rack unit.

Highlights:

• 42 total outlets: 24 C13 and 18 C39 combo outlets that accept C14 or C20 plugs
• 3 phase input at 120 / 208 V, delivering up to 8.6 kW and 24 A per phase
• 10 ft power cord with NEMA L21-30P input plug
• 0U vertical form factor preserves usable rack space
• Metered input readings on a local LCD plus remote monitoring through Ethernet, SNMP, and USB
• Secure boot firmware and chain-of-trust encryption guard against unauthorized code
• Tool-less mounting and low-profile circuit breakers for quick installation and service
• Cascadable up to 40 units, each with an individual IP address
• Optional environmental sensors track temperature and humidity inside the rack
• Aluminum housing backed by a 3-year limited warranty